Sharp Aquos LC 30HV6U - Manual (Page 46)

46
Using external equipment
RGB cable
(commercially available)
AVC System (front view)
ø 3.5 mm stereo minijack cable
(commercially available)
PC
15 14 13 12
9
11
10 8 7 6
5 4 3 2 1
Pin No. Signal name Pin No. Signal name Pin No. Signal name
1 R 6 GND (Ground) q Not connected
2 G 7 GND (Ground) w SDA
3 B 8 GND (Ground) e HD
4 Not connected 9 ם5V r VD
5 CSYNC 0 GND (Ground) t SCL
Viewing an image from a PC
Connecting a PC
Use the PC terminals to connect a PC.
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 77 for a list of PC signals compatible with the System.
Signal names for 15-pin mini D-sub connecter
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
Displaying an image from a PC
To view an image from a PC, select “PC” from the
“INPUT SOURCE” menu using INPUT on the remote
control unit or on the Display. (See page 52.)
When connecting to a PC, the correct input signal type
is automatically detected. If the PC image does not
come in clearly, you may need to set the Auto Sync.
adjustment on the “Auto Sync.” in the “Setup” menu.
(See page 51.)
INPUT
TV
ANT-A/B
MODE
AV
POWER
MTS CC
TV VCR CBL
/SAT
/DTV DVD
/LD
Virtual
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
Display
INPUT button
You only need to select the input source on the “INPUT
SOURCE” menu.
NOTE
• Each time INPUT is pressed, the input source toggles.