Symbol Technologies PPT 2800 - Manual (Page 8)

6
P P T 2 8 0 0 S e r i e s
3. The Terminal Charge LED turns red (may take up to one
minute) to indicate charging, then green when the battery is
fully charged. The terminal’s battery is fully charged after
approximately 2 1/2 hours.
Charging a Spare Battery
To recharge a terminal’s spare battery, insert it in the spare battery
charging slot in the back of the cradle, oriented so the contacts are
facing down and toward the back of the cradle. Press the battery
down into the slot until firmly seated.
The Spare Battery Charge LED turns red to indicate charging,
then green when the battery is fully charged. The battery is fully
charged after approximately 2 1/2 hours. See the cradle’s Quick
Reference Guide for more information.
Spare Battery
Charge LED