Symbol Technologies PPT 2800 - Manual (Page 10)

8
P P T 2 8 0 0 S e r i e s
Starting the PPT 2800
Press the red power button to start the terminal. If the terminal
does not power on, perform a hard reset. See
Performing a Hard
Reset on page 17 .
As the terminal initializes its unique Flash File system, the Symbol
splash screen displays for about a minute.
When the Welcome screen appears, tap anywhere on the screen
to continue to the Align screen. Note that these screens also
appear every time you perform a hard reset.
Aligning the Screen
To align your PPT 2800 so the cursor on the touch screen aligns
with the tip of your stylus:
1. If necessary, adjust the contrast on the PPT 2800 so the
screen is readable. See Controlling the Contrast/Backlight
on page 9 .
2. Remove the stylus from its storage silo on the back of the
PPT 2800.
Power
Button