Sharp CD-DH950P - Manual (Page 15)

E-14
Troubleshooting chart (continued)
Maintenance
Cleaning the cabinet Q
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (gasoline, paint thinner, O
etc.). It may damage the cabinet.
Do not apply oil to the inside of the unit. It may cause
O
malfunctions.
Cleaning the CD pickup lens Q
In order to ensure proper operation of the CD player,
preventative maintenance (cleaning of the laser pickup
lens) should be performed periodically. Lens cleaners are
commercially available. Contact your local CD software
dealer for options.
Remote control Q
Symptom Possible cause
The remote control O
does not operate.
Is the AC power cord of the O
unit plugged in?
Is the battery polarity correct?
O
Is the battery dead? O
Is the distance or angle O
incorrect?
Does the remote control
O
sensor receive strong light?
Tuner Q
Symptom Possible cause
The radio makes O
unusual noises
continuously.
Is the unit placed near the TV O
or computer?
Is the FM antenna or AM loop
O
antenna placed properly?
Move the antenna away from
the AC power cord if it is
located nearby.
iPod and iPhone Q
Symptom Possible cause
No sound is O
produced.
No image
appears on the
TV/monitor.
The iPod or iPhone is not O
playing.
The iPod or iPhone is not
O
properly connected to the
unit.
Is the AC power cord of the
O
unit plugged in?
The video cable is not
O
properly connected.
The TV/monitor’s input
O
selection is not properly set.
The iPod TV out feature has
O
not been set to output video.
iPod or iPhone O
will not charge.
The iPod or iPhone is not O
making full contact with the
connector.
The iPod or iPhone is not
O
supported.
Refer to page 6 for
O
compatible models.
“This accessory O
is not made
to work with
iPhone” or
similar, appears
on iPhone
screen.
The iPhone battery is low. O
Please charge the iPhone.
iPhone is not properly
O
docked.
If problem occurs Q
When this product is subjected to strong external
interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
Set the unit to the stand-by mode and turn the power 1
on again.
If the unit is not restored in the previous operation,
2
unplug and plug in the unit again, and then turn the
power on.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
Factory reset, clearing all memory Q
Press the ON/STAND-BY button to enter the power 1
stand-by mode.
While pressing down the OPEN/CLOSE button and
2
the button, press the CD button until “CLEAR ALL”
appears.
OPEN / CLOSE CD
Caution:
This operation will erase all data stored in memory including
clock, timer settings, tuner preset, and CD program.
Condensation Q
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, tape heads, etc.) or on the
transmitter on the remote control. Condensation can cause
the unit to malfunction. If this happens, leave the power on
with no disc (or cassette) in the unit until normal playback
is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
Before transporting the unit Q
Remove the iPhone/iPod, USB memory device and disc
from the unit. Then, set the unit to the power stand-by mode.
Carrying the unit with iPhone/iPod or USB memory device
left docked or discs left inside might damage the unit.
CD-DH950P_US_EN.indd 14 CD-DH950P_US_EN.indd 14 2/21/2011 12:13:26 PM 2/21/2011 12:13:26 PM