SIIG 104-0487A - Manual (Page 5)

5
For Windows Vista: Right click Computer, click
Manage, click Continue. Click Device Manager.
For Windows Server 2008: Right click Computer and
click Manage. Double click Diagnostics, click
Device Manager.
2. Double click either SCSI and RAID controllers or
Storage controllers, and Silicon Image SiI 3132...
Controller should be displayed.
Windows Device Connection
External Devices
External Serial ATA devices should come with their own
accessories. In most cases, you just need to power up the
external device and connect it to the external port. For
more information, please refer to the external device's
manual.
Connecting Hard Disk Drives
When connecting a hard disk drive, hold the eSATA II
2-Port ExpressCard so it does not move from side to side,
otherwise, the ExpressCard may eject from the slot.
Hot-Plugging Hard Disk Drives
Follow these instructions to remove a hard drive from a
powered up system, not following these instructions
may corrupt or destroy data or cause system crashes.
1.
Right click My Computer and click Manage. (For
Windows Vista operating system, click Continue).
2. Select Device Manager.
3. Double click Disk Drives, right click the hard disk
and select Disable. (Select Enable for a previously
disabled hard drive)