SIIG 104-0487A - Manual (Page 10)

10
Mac OS Driver Installation
This section provides information on how to install the
eSATA II 2-Port ExpressCard drivers.
1.
Insert driver CD. At the desktop double click Driver
icon.
2. Double click Mac folder.
3. Double click Sil3132_1.1.9u_Si1_Pkg.pkg.
4. Click Continue, Continue, Continue, then Agree.
5. In OS 10.5, click Change Install Location. Otherwise,
please continue with step #6.
6. Select the destination drive, click Continue, then
click Install.
7. At Authenticate, if there's a password enter it now,
then OK. Otherwise, just click OK.
8. At the successful install screen, click Close.
9. Restart Mac OS to complete the installation. When
Mac OS resumes, insert the expresscard at any time.
To Verify Mac Installation
1. At the Desktop, click Go, then click Utilities.
2. Double click System Profiler.
3. Under Hardware, click PCI Cards.
4. On the right side of the screen, ExpressCard and
Subsystem ID: 0x3132, along with other data should
be displayed.
Mac OS Hot-swapping Hard Disk Drives
1. Click and drag the drive icon into the Trashcan.
2. You can now safely unplug the hard disk drive.