Smeg DWD63BLE - Manual (Page 7)

User instructions
28
3. Description of the controls
3.1 Front panel
All the dishwasher controls are grouped on the front panel.
1 WASHING PROGRAM SELECTOR
2 ON/OFF BUTTON
3 START/STOP BUTTON
4 ½ LOAD WASH BUTTON (certain models only)
5 POWER ON LIGHT
6 SALT WARNING LIGHT
7 RINSE AID WARNING LIGHT
8 PROGRAM PHASE INDICATOR LIGHTS ( ż light off / Ɣ light on)
9 BUTTON FOR DELAYED START FROM 1 TO 9 HOURS (certain models only)
10 DELAYED START INDICATOR DISPLAY (certain models only)
11 RECESSED DOOR HANDLE
3.2 Washing programs
Before starting a washing program make sure that:
• The water supply tap is open.
• The correct amount of detergent has been added to the dispenser.
• The baskets have been correctly loaded.
• The spray arms are able to rotate freely and without obstruction.
• The dishwasher door is securely closed.
HALF LOAD WASH SETTING
This function is especially suitable for loads up to 6 place settings and allows saving of water and
electricity. It is controlled by the HALF LOAD button (4) and allows washing in the upper basket
only.
IMPORTANT: at the end of the program remember to deactivate the function to ensure the next
wash is not also carried out in half load mode by mistake.
A cutlery basket can be placed in the upper basket, while the lower basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of
water will only reach the upper basket.