SUPER MICRO Computer SUPERSERVER 6014L-T - Manual (Page 114)

C-16
S UPER S ERVER 6014L-T User's Manual
C-2 Installing the ICH5R/6300 ESBDriver
1. Insert Supermicro's bootable CD into the CD drive before a system reboot, and
the screen "Super Micro Driver Diskette Maker" will appear.
2. Choose "Intel ICH5R/6300 ESB Driver by 3rd Party (Adaptec)" from the list and
press .
3. From the next screen displayed, choose the OS driver you want to install and
press .
4. Insert a formatted diskette into drive A: and press as prompted.
5. Exit the program after the process is completed. Then, reboot the system.
6 Insert the Microsoft Windows OS Setup CD in the CD drive, and the system will
start to boot up from the CD.
7. Press the key when the message "Press F6 if you need to install a third
party SCSI or RAID driver" displays.
8. When the Windows OS Setup screen appears, press "S" to specify additional
device(s).
9. Insert the driver diskette "Adaptec Embedded Serial ATA Raid Controller Driver"
into drive A: and press the key.
10. Choose "Adaptec Embedded Host Serial ATA Raid Controller" from the list
indicated in the Windows OS Setup Screen, and press the key.
11. Press the key to continue the installation process. (If you need to specify
any additional devices to be installed, do so at this time.) Once all devices are
specifi ed, press the key to continue with the installation.
12. From the Windows OS Setup screen, press the key. The OS Setup will
automatically load all device fi les and then, continue the Windows OS installation.
13. After the Windows OS installation is completed, the system will automatically
reboot.