SUPER MICRO Computer SUPERSERVER 6014L-T - Manual (Page 101)

Appendix C: Software Installation
C-3
To run the Adaptec RAID Confi guration utility, do to the following:
1. Enable the RAID function in the system BIOS (refer to Chapter 7 for System
BIOS Confi gurations).
2. Press the and keys simultaneously when prompted to do so during
system boot. (Refer to the previous page for detailed instructions.)
Using the Array Confi guration Utility (ACU)
When you press and keys simultaneously at the prompt during system
bootup, the main menu will appear as seen below.
Note: To select an option, use the arrow keys to highlight the item and then press the
key to select it. To return to the previous menu, press the key.