Shark SC505 - Manual (Page 6)

Model SC505 OPERATING INSTRUCTIONS cont.
1 YEAR LIMITED WARRANTY
Wood, Vinyl and Marble Floors
Use the floor brush with a terry cloth
attached. Move the brush across the floor
as if you are mopping. When the towel is
soiled, you can turn the towel over or
replace it with a clean towel. If you are
working on a very dirty area, you can move
the brush over the area slowly, several
times. If it is a wood floor, move fast to
avoid heat or moisture buildup in the wood.
By cleaning with the towel over the brush,
you will not affect the shine on the floor.
To Strip Wax: Use floor brush for open
areas; detail brush for corners or tight areas
- no towel, slow strokes. Work a small area
at a time - remove the emulsified wax from
the floor. When all of the wax has been
stripped, immediately clean the floor and
brushes with water before residue has a
chance to harden on them. Go back over
the stripped area with the floor brush with a
towel to remove any remaining residue
before waxing.
To Clean Waxed Floors: Wrap clean towel
around the floor brush, brush quickly. This
will cause the dirt to be removed but not the
wax.
Vinyl Floors: Do not allow heat to buildup
in any kind of vinyl, since it can soften it
enough to affect its texture. Work fast on
vinyl.
Tile Floors: Use the detail attachment with
the detail brush attached to an extension.
Have the floor brush with cloth attached
ready as well. Clean the grout between the
tiles with the detail brush. Remove the detail
brush and attach the floor brush, move the
brush across the floor to clean the tile and
remove excess moisture and residue. For
areas of tile that are very dirty, remove the
towel and agitate with the brush. Do not let
the area dry before you wipe it up.
Blinds
Use the detail brush to clean blinds.
Move the brush over the surface, allowing
enough time for the vapor to penetrate.
Work quickly on PVC blinds. Test for
color fastness on fabric blinds before
using.
Your Steam Cleaner is warranted to be free from defects in material and
workmanship for a period of one (1) year from the date of purchase when utilized
for normal household use by the original purchaser only. The included Warranty
Registration Card must be filled out and returned within 10 days of purchase.
This is essential for your Warranty to be effective should any problem arise with
this product.
Should any defect covered by the terms of the limited warranty be discovered
within one year, EURO-PRO Corp. will repair or replace any defective part
provided the unit is returned by the original purchaser, freight prepaid, to:
US: EURO-PRO Corp., 178 West Service Rd., Champlain, N.Y. 12919 Tel.: (800) 798-7398
Proof of purchase date and $12.95 for handling and return packing/shipping
charges must be included.*
The liability of under this warranty is limited solely to the cost of the replacement
parts or the complete unit at our option. LABOUR CHARGES ARE NOT
INCLUDED.
This warranty does not cover normal wear of parts and does not apply to any unit
that has been tampered with or used for commercial purposes. This Limited
Warranty does not cover damage caused by misuse, negligent handling, or
damage due to faulty packaging or mishandling in transit (by any common
carrier).
This warranty is extended to the original purchaser of the unit and excludes all
other legal and/or conventional warranties. The responsibility of EURO-PRO
Corp. , if any, is limited to the specific obligations expressly assumed by it under
the terms of the limited warranty. In no event is EURO-PRO Corp. liable for
incidental or consequential damages of any nature whatsoever. Some
States/Provinces do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This warranty gives you specific legal rights which vary from state to state or
province to province.
*Important: Carefully pack item to avoid damage in shipping. Be sure to attach
tag to item before packing with your name, complete address and phone number
with note giving purchase information, model number and what you believe is the
problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve
our products, therefore the specifications contained herein are subject to
change without notice.
Refrigerator - Use the concentrator nozzle
alone to blow away dirt in the ice machine
and on door seals. The vapor will not dry
out or crack the seals as chemicals often
do. Can openers and other kitchen
equipment can be easily cleaned with the
detail brush on the concentrator nozzle to
get into all the nooks and crannies.
To clean microwaves or other small
appliances use the detail brush for small
areas.
Note: When cleaning small electrical
appliances always unplug them from outlet
before cleaning.
Upholstery
Use the floor brush attached directly to
the hand grip with a clean white terry
cloth towel. Use fast, light strokes, avoid
getting the fabric wet. Be patient with
stubborn spots; work on a spot gently for
no more than a minute at a time, then
wait five minutes for the area to dry and
repeat. Use circular movements or back-
and-forth and side-to-side movements to
get all sides of surface fibers. Finish with
a brushing in one direction that will give
the fabric a uniform appearance.
CAUTION: Always determine the
color-fastness of any fabric-especially
with reds or blues - by taking a clean,
moist, warm towel and gently rubbing a
small area as far down on the back or
other out of the way place on the
furniture as possible. If color comes off
on the towel, you may need to have the
piece dry cleaned.
Exterior Areas
To clean inside your car, use the floor
brush with a terry cloth towel attached to
clean upholstery and interior areas just as
in the home. You should not expose the
bristles to leather - use only the brush with
the terry cloth towel attached. For
detailing the wheels, use the concentrator
nozzle and the detail brush. Exterior
windows are cleaned best by applying the
vapor with the concentrator nozzle and
following with a paper towel.
To clean bicycles, use the detail brush.
To clean equipment, use the detail brush,
depending on the surface area.
Printed in Turkey
11
10