Sony CMD-Z5 - Manual (Page 20)

20 GB
Call hold
Call hold allows you to manage 2 calls at the same time. For example, if
you are speaking to someone on your CMD-Z5 and you want to make
another call, you can put the current or active call on hold in order to call
someone else. Check with your Network Operator/Service Provider for
details about this service.
One active call
1 Press the Jog Dial backward and select
Call hold.
2 Press the Jog Dial to confirm your selection.
3 Press the Jog Dial again to access the Phonebook to retrieve a
number or use the keys to enter a number.
4 Keep the Jog Dial pressed (or press ) to make a call.
Tip
• You can also put a call on hold automatically. Simply use the Notepad
and make a second call; or just press .
End all calls
Press the Jog Dial backward and select End all calls or simply press
at
any time to end both the active call and the call on hold.
Send DTMF
Press the Jog Dial backward and select this option during a call to Send
DTMF tones (e.g. from a Phonebook entry) which are tones designed to
respond to menu prompts e.g. in your Voice mail or other services.
Mic off/Mic on
Press the Jog Dial backward and select the Mic off/Mic on option to mute
and unmute the microphone.