Sierra Wireless PC3320 - Manual (Page 24)

Installation Guide
22 2130361
5. To begin activation of the PC3320, select the method and click Next.
Manual activation
Verizon has provided the required information on your package or with the
product shipment.
1. Select the Manual Activation radio button and click Next.
2. The wizard prompts for your activation code.
Enter six zeroes ( 000000 ) then click Next .
3. Enter the phone number provided with your package. Enter the IMSI. Click Next.
4. Enter the SID (System ID) provided with your package. Click Next.
5. Click Finish on the final window of the wizard.
On completion, the PC3320 card is ready for use. The next chapter explains how
to use Mobile Connection Manager to manage and monitor your connections.
Automated activation
To use automated activation:
1. Select the Automated Activation radio button and click Next.
2. The wizard advises that it will make a network connection, dialing the displayed
number. Leave the number unchanged unless told by a technical service represen-
tative to enter a different value. Click Next.
3. Follow any instructions or prompts provided to activate the card.
Mobile Connection Manager displays the activation progress in the call status
area. When the process is complete you should see the message
“Ready to
Connect” . At this point your PC3320 card is ready to use. The next chapter
explains how to use Mobile Connection Manager to manage and monitor your
connections.
Note: If you do not get the “Ready to Connect” message, retry the process. If the
process continues to fail, use manual activation or contact your service provider.