Quicktips – Sanyo AVM-3259G User Manual

Page 6

➀

Mode Keys
Use these keys to program the remote
control and to select the operating
mode (VCR, TV, or Cable).

➁

Video Mode Key
Press to select the program source to
be displayed on the screen: TV signal
or signal from the equipment you have
connected to the A / V jacks.

➂

Number Keys
Two keys must be pressed to select a
channel. Example: Press 0 then 6 to
select channel 6. For cable channels
100 through 125, press and hold the
1 key until C

–

appears. Then press

the other two numbers.

➃

Caption Key (See page 12.)

➄

Menu Key
Use this key with the /

and

keys to navigate and adjust

features of the on-screen menu system
(see pages 8 ~ 10).

➅

Channel (CH) Scanning ( / )
and Volume ( / ) Keys
Press to scan through the channels in
memory and to adjust the volume.

➆

Mute Key
Press once to turn off the volume.
Press again to restore.
Note: When using the audio out jacks
this key will not mute the sound.

➇

VCR Keys
These keys control the VCR’s Fast
Forward (

), Rewind (

Play (

), Record (

Stop (

), and Pause (

)

functions.

➈

V-Guide Key (See pages 14 and 15.)

➉

Reset Key

Press this key twice to restore factory
settings. The TV will automatically
start Channel Search and clear all
customized settings. (See page 16.)

Power Key
Press to turn TV on or off.

Sleep Key
Use this key with the “0” key to set the
Sleep Timer (see page 15).

Recall Key
Select a channel then select another
channel using the number keys. Press
Recall to switch between the channels.

Display Key
Press once to display the channel
number and time. Press twice to
display the channel number continu-
ously. Press again to remove the
display.

➠

Point towards TV

▲

•

■

❙❙

QuickTips

■

Point the remote
control toward the
equipment you want to
operate. Objects
between the remote
and the equipment
may cause misopera-
tion of the remote
control function.

■

Make sure batteries
have been installed
correctly.

■

If the remote control
does not work: Press
T V key (see item 1).

■

The remote control
must be programmed
before it will operate
your VCR or Cable
Box. See page 7.

■

Cannot select channel
with number keys.
Press “0” in front of
numbers 1 ~ 9.
Example: Channel 05.

■

The “C” in front of the
channel number indi-
cates a Cable channel.

■

Adjusting the volume
level: Right flashing
arrow indicates
volume is increasing
and left flashing arrow
indicates volume is
decreasing.

■

Channel number will
not display continuously
when captioning is on.

■

Using V-Guide
TV Parental Guide-
lines settings can be
changed only by using
the Remote Control.
See pages 14 and 15.

UNIVERSAL REMOTE CONTROL KEYS

MENU

RECALL

CAPTION

SLEEP

RESET

VIDEO

MODE

POWER

CABLE

VCR

REC

STOP

PAUSE

PLAY

MUTE

DISPLAY

VOL

V-GUIDE

➀

➁

➂

➃
➄

➇

➅

➈

➆

➉

➀

Mode Keys
Use these keys to program the remote
control and to select the operating

➄