Sony CDP-XB720 - Manual (Page 6)

Basic Operations
6 EN
Turn on the amplifier and select the CD player position.
Press U to turn on the player.
Press § OPEN/CLOSE, and place a CD on the tray.
Playing a CD
1
2 •
See pages 4 – 5 for the hookup
information.
If you turn on the player with
a CD in the tray
You can start playing
automatically from the
beginning of the CD. If you
connect a commercially
available timer, you can start
playing the CD at any time
you want.
If “– NO STABI –” appears in
the display (only for
CDP-XB920 and CDP-XB920E)
Place the supplied stabiliser
on the CD.
If you do not, this indication
appears.
Note
In Step 3, do not place two or
more CDs at the same time.
If you do so, you may damage
the discs and/or the player.
Note
If you push the disc tray in while
the power is off, the disc tray
opens and closes automatically
when you turn on the player
again. (CDP-XB820 only)
2 3 4
Connect the
headphones.*
Adjust the
headphones volume.**
4
3
With the label side up
Place the supplied stabiliser on the CD
with the smaller hole side facing up.
* Only for CDP-XB920, CDP-XB820 and CDP-XB720
** Only for CDP-XB920 and CDP-XB820
Press ·.
The disc tray closes and the player plays all the tracks once
(Continuous Play).
Adjust the volume on the amplifier.
• CDP-XB920 and CDP-XB920E
• CDP-XB720 and CDP-XB720E
PHONES PHONE LEVEL FILTER PLAY MODE REPEAT FADER TIME/TEXT
LANGUAGE
OPEN/CLOSE STD 1
2
3
0 10
PEAK
SEARCH
AUTO
SPACE
MUSIC
SCAN
EDIT/
TIME FADE CHECK CLEAR
PUSH ENTER
AMS
With the label side up
• CDP-XB820
With the label side up