Speco Technologies CVC6146SCFF - Manual (Page 26)

- 26 -
NOTE
* PAN and TILT function should be available when using the digital zoom.
2-4) GAMMA : Desired gamma values can be adjusted between 0.05 ~ 1.00.
2-5) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu.
3. MOTION
3-1) When the special menu screen is displayed, use the Up or Down botton to access the MOTION menu.
① AREA SELECT : Determines whether the MD area selected AREA 1, 2, 3, 4.
② Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left / Right
button between the level 0 ~ 100.
③ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.
④ Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right
button between the level 0 ~ 100.
MOTION
AREA SELECT
AREA DISPLAY
LEFT / RIGHT
WIDTH
TOP / BOTTOM
HEIGHT
SENSITIVITY
RETURN
AREA
ON
100
100
100
100
40