Projecting – Sony VPL ES7 User Manual
Page 20
20
Projecting
1
Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
2
Video cable (not supplied) or S-Video cable
(not supplied)
To connect to a video GBR/
Component output connector
1
Signal Cable (not supplied)
HD D-sub 15-pin (male)
↔ 3 × phono plugs
2
Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
• For stereo audio connection, connect the
stereo audio connecting cable to the AUDIO
INPUT connector.
• Set the aspect ratio using “Aspect” on the
INPUT SETTING menu according to the
input signal.
• When you connect the projector to a video
GBR output connector, select “Video GBR”
or when you connect the projector to a
component output connector, select
“Component” with the “Input-A Signal Sel.”
setting on the SET SETTING menu.
Projecting
1
Plug the AC power cord into a wall
outlet, and connect all equipment, then
remove the lens cover.
Notes
Rear side
VCR
to video
GBR/
component
output
VPL-EX70
to audio
output (R)
to
audio
output
(L)
INPUT
MENU
NETWORK USB
RESET
AUTO FOCUS
D ZOOM
LENS
ENTER
VOLUME
KEYSTONE
/TILT
FREEZE
PIC MUTING
AUDIO MUTING
APA
1
8
4
1,2
7
7
7
2
4
Front remote
control detector