Windows 98 second edition, Windows millennium edition – SysKonnect SK-9E21D User Manual
Page 19

SysKonnect SK-9E21D 10/100/1000Base-T Adapter PCI Express
Windows
21
Windows 98 Second Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-9E21D 10/100/
1000Base-T Adapter, PCI Express, supporting Windows 98 Second Edition
(Windows 98 SE). This driver only supports Windows 98 SE and Windows Me.
With PCI Express adapters, due to the plug & play facility of PCI, Windows 98 SE is able to
find, identify, and configure an adapter automatically.
To install the driver, proceed as follows:
1.
After you have installed the adapter in your computer (for details see chapter 1 "Installa-
tion of the Network Adapter"), boot Windows 98 SE.
Windows 98 SE detects the SysKonnect SK-9E21D Adapter as “PCI Ethernet Controller”
during the boot operation.
The window “Add New Hardware Wizard” is displayed.
2.
Click N
EXT
.
The menu “What do you want Windows to do?” is displayed.
3.
Select the check box S
EARCH
FOR
THE
BEST
DRIVER
FOR
YOUR
DEVICE
(R
ECOMMENDED
).
4.
Click N
EXT
.
5.
Select the source from which the driver is to be installed (e.g. CD-ROM, floppy disk, hard
disk).
6.
Select the checkbox S
PECIFY
A
LOCATION
.
7.
Type the path to the driver, e.g.
e:\SK-9E21D\Windows\Win98SE
, where ”e” is the
designation of the CD-ROM drive on your system.
8.
Click N
EXT
.
The window “Location of driver” is displayed.
9.
Click N
EXT
.
The menu “Windows has finished installing the software that your new hardware device
requires” is displayed.
10. Click F
INISH
.
11. Restart your system.
For more information, refer to the corresponding readme file.
Windows Millennium Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-9E21D 10/100/
1000Base-T Adapter, PCI Express, supporting Windows Millennium Edition (Windows Me).
This driver only supports Windows Me and Windows 98 SE.
With PCI Express adapters, due to the plug & play facility of PCI, Windows Me is able to find,
identify, and configure an adapter automatically.
To install the driver, proceed as follows:
1.
After you have installed the adapter in your computer (for details, see chapter 1 "Installa-
tion of the Network Adapter"), boot Windows Me.
Windows Me detects the SysKonnect SK-9E21D Adapter as “PCI Ethernet Controller”
during the boot operation.
2.
Select the check box S
PECIFY
THE
LOCATION
OF
THE
DRIVER
(A
DVANCED
).
3.
Click N
EXT
.
4.
Select the check box S
EARCH
FOR
THE
BEST
DRIVER
FOR
YOUR
DEVICE
(R
ECOMMENDED
).
5.
Select the source from which the driver is to be installed (e.g. CD-ROM, floppy disk, hard
disk).
6.
Select the check box S
PECIFY
A
LOCATION
.