Sanyo VCC-HD4600P - Manual (Page 12)

11
Specifications
Camera ■
Image pickup device 1/2.5" CMOS sensor
Effective pixels 16:9 1920 (H) × 1080 (V), 4:3 2288 (H) × 1712 (V)
Lowest image illumination 50IRE: 2.0 lx (F1.8, in color mode with high gain)
50IRE: 0.1 lx (F1.8 in black-and-white mode with high gain)
Video S/N ratio 50 dB or higher (when AGC is “Off”)
Lens Focal Length: 6.3 to 63 mm, F number: F1.8 - 2.5
Optical zoom 10x, electronic zoom 16x (up to 160x when used
in combination with the optical zoom)
Digital PTZ Enables electronic pan, tilt, and zoom operations on clipped
subject areas in VGA size, Zoom magnification: 2× max
DNR (digital noise
reduction) ON/OFF
Image inversion Horizontal/Vertical/Horizontal and vertical/Off
Privacy mask On/Off, max. 8 mask patterns
Motion sensor On (Motion masking/motion detection area setting, or video
analytics)/Off, face detection
Sway compensation ON/OFF
Language selection English, French, German, Spanish, Japanese
For further details on the specifications of the camera, refer to the electronic manual.
I/O ■
Video output HD Output: HDMI terminal (TYPE C)
Monitor output for video adjustment: BNC terminal (MONITOR
OUT)
LAN 10BASE-T/100BASE-TX (RJ-45 connector)
EX-HDD Connector For connecting SANYO-specified external hard disk case
(VA-HDC4000)
SD Card Slot 1 (SDHC compliant, max. 32 GB supported)
Alarm input 2 (NO/NC), also serving as Day/Night switching function input
Alarm output 2 (NO/NC switching, 16 V, 150 mA, open collector)
Lens remote control Zoom, Focus, Common (Voltage control: ±(6 to 12 V))
Audio input/output Audio input (3.5-mm Mini jack)
Audio output (3.5-mm Mini jack)
Recording media ■
SD memory card/
External HDD Normal recording, Alarm recording, Backup recording in event
of a network failure, Log information recording
For the recommended SD memory cards, visit our website.
http://www.sanyo-cctv.net/