Step 2: connecting the audio cords, Select a connection – Sony DVP-NC650V User Manual

Page 20

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.

Select a connection

Select one of the following connections,

through

To enjoy SACD Multi or 96 kHz/24 bit sound, use connection

* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are

trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.

** Manufactured under license from Digital Theater Systems, Inc. US PAT. No. 5,451,942 and other world-wide

patents issues and pending. “DTS” and “DTS Digital surround” are trademarks of Digital Theater Systems, Inc.
© 1996 Digital Theater Systems, Inc. All rights reserved.

Connection

Components to be connected

(page

21)

TV (stereo)

(page

22)

AV amplifier (receiver) having 5.1ch input jacks

• 4 speakers

(front L and R, rear L and R)

• 6 speakers

(front L and R, center, rear L and R, subwoofer)

(page

22)

AV amplifier (receiver) having a Dolby* Digital or DTS** decoder,
and a digital input jack

• 6 speakers

(front L and R, center, rear L and R, subwoofer)

(page

24)

Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)

• 2 speakers

(front L and R)

(page

24)

MD deck/DAT deck

(page

26)

AV amplifier (receiver) with a Dolby Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)

• 3 speakers

(front L and R, and rear (monaural))

• 6 speakers

(front L and R, center, rear L and R, subwoofer)