Sony VGX-TP1 User Manual
Page 50
50
Using Your VAIO Computer
To connect in STB mode (Option 2)
1
Connect one end of a TV coaxial cable (1) (not supplied) to your cable service access (wall outlet) (2). Connect the other
end to the VHF/UHF IN port on the back panel of your set-top box (STB) (3).
2
Connect a second TV coaxial cable (4) (not supplied) to the VHF/UHF OUT port on the set-top box (STB) (3). Connect
the other end to the VHF/UHF port (5) on the rear of your TV monitor or display.
3
Connect one end of a stereo A/V dubbing cable with triple RCA plugs (6) (not supplied), to the Composite Audio Out (L/
R) jacks (7) and the Video Out jack (8) on the back panel of your set-top box (STB) unit (3), matching the plug and jack
colors.
4
Connect the other RCA plugs of the stereo A/V dubbing cable (6) to the appropriate plug receptacles of the AV cable
adapter (9) (supplied), matching the plug and receptacle colors.
5
Connect the other end of the AV cable adapter (9) into the AUDIO/VIDEO INPUT port (10) on the computer.
6
If you prefer better video quality, connect one end of an S Video cable (11) (not supplied) to the S Video Out port (12) on
the back panel of the set-top box (STB) (3). Connect the other end to the S Video plug receptacle of the AV cable adapter
(9).