Sony 4000CL-MAV-PBIO - Manual (Page 10)

10 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option
10. TRIGGERS FROM THE PRODUCTION SWITCHER
Firing a trigger, using either the Timeline or Run function on the production switcher, causes the
ST300 to put the Video Server into the following modes, based upon the trigger value:
GRASS VALLEY GROUP
Trigger Value Mode
0 Play
1 Recue to beginning of clip
2 Slo-mo using ST300 Preset Speed
3 Reverse Play
4 Still Frame
5 None
6 or greater Play
SONY
Trigger Value Mode
0 Recue to beginning of clip
1 Play
2 Slo-mo using ST300 Preset Speed
3 Reverse Play
4 Still Frame
5 None
6 or greater Play
To control more than one VTR, enable the Peripheral Device Address for the required VTRs. The
Trigger will be sent to the enabled devices.
OR
GANG the required VTRs on the ST300. See the Menu Table for GANG instructions. Enable the
Peripheral Device Address for one of the GANGed VTRs. The Trigger will be sent to the enabled
VTR. The other VTRs in the GANG will perform the same action.