Samsung TXN 3245FP - Manual (Page 22)

22
Connecting to DVI (Digital Visual Interface)
(TXN3298HF/TXN3098WHF/ TXN2798HF)
By inputting a high-bandwidth Digital Content Protection high-definition picture source
to the DIGITAL INPUT jack on the TV, high-definition pictures can be displayed on the
screen in their digital form. (This DIGITAL INPUT jack is for use in the future when
High-bandwidth Digital Content Protection DTV decoder, DVD players and D-VHS are
put on the market.)
2
Connect a set of audio
cables between the
AUDIO INPUT jacks on the
TV and the AUDIO OUT
jacks on the Set Top Box.
3
Connect a DVI cable
between the DIGITAL
INPUT jack on the TV and
the DVI OUT jack on the
Set Top Box.
1
Connect a coaxial cable
between the ANTENNA
OUT terminal on the Set
Top Box and the antenna
terminal on the TV.
I
N S TA L L AT I O N
Note
• The DIGITAL INPUT jack can only be use with 1080i and 480p picture signals.
Set the DTV decoder DIGITAL OUTPUT jack output setting to 1080I OR 480P.
For detailed information, refer to the Set Top Box instruction manual.
• The DIGITAL INPUT jack is not compatible with the picture signal of a personal computer.
• Use a DVI 25-pin cable (commercially available) in order to digitally connect the TV with a
DTV decoder.