Sharp VL-Z7U - Manual (Page 97)

83
Digital Still Camera Features
DELETE ALL? indicator
Deleting All Stored Images
You can delete all stored images on a card
in one operation.
Notes:
• Deleted images cannot be restored. Check
whether or not you want the images before
performing the procedure below.
• If you want to keep some images on the card,
first delete-protect them (see page 81), and
then perform the procedure below.
1
In Card Playback mode, press the
DISPLAY button until the mode
screen appears.
2
Press l or m on the Operation
button to select “DELETE ALL”, then
press the center of the Operation
button.
3
Press l or m to select “EXECUTE”,
then press the center of the Operation
button.
• The DELETE ALL? indicator appears.
4
Press l or m to select “YES”, then
press the center of the Operation
button.
• To cancel the setting, select “NO”.
5
Press the DISPLAY button to finish
the setting.
Notes:
• The protected images cannot be deleted.
Cancel the protection setting to delete the
image (see page 81).
• If a print order is assigned to delete-
protected images and you perform the
procedure above, the print order will cancel
(the protection setting will not cancel).
• It may take several seconds to delete all
images from the card.
• Do not turn the power off while deleting
images.
E X E C U T E
M E N U
D E L E T E O N E
D E L E T E A L L
P I C . E F F E C T
1 0 0 0 - 0 0
NORMA L
1
1
4
2
5
3
6
A L L ?
NO
Y E S
S E T S E L E C T
D E L E T E