Getting started: vacuum mode – Shark VAC-THEN-STEAM MV2010WM User Manual
Page 6

6
TOLL FREE:
1-800-798-7398
7
www.sharkclean.com
English
Getting Started: Vacuum Mode
TURNING OFF THE VACUUM
1
Place your foot lightly on the top of
the base. Tilt cleaning unit into the
upright position.
2
Turn off the Vacuum Power button
and unplug the unit.
3
Wrap cord around cord holders and
secure plug. Store cleaning unit in an
upright position.
EMPTYING THE DUST CUP
1
Release the dust cup latch at the
bottom of the canister. Pull the dust
cup assembly down and out.
2
Twist off dust cup cover counter-
clockwise to open.
3
Tap canister gently over trash
receptacle to empty.
4
To reattach the dust cup cover, align
the indicators that are printed on the
rear of the dust cup and cover. Turn
the cover clockwise and make sure
the full arrows are aligned before
reinserting the dust cup into the
vacuum.
5
Replace the dust cup into the
vacuum by first pushing in the top
part. Now swing the bottom part in
and push until it clicks.
IMPORTANT:
Always Carry
the
Vac-Then-
Steam by the
cleaning unit
collar; rather
than by the
Handle.
1
1
5
2
3
4
2
3