Samsung 450Nb - Manual (Page 4)

2
Connecting Your Monitor
1
Turn off your computer and unplug the
power cord.
2
Signal cable
Connect the end of the signal cable to
your computer’s video port. If you are
using a Macintosh computer, connect
the cable to a Macintosh adapter, and
set the pins on your adapter (adapter
not included). A PC-compatible
computer does not need an adapter.
3 Power port
Connect the power cord for your
monitor to the power port on the back
of the monitor.
4
Power cords
Plug the power cord for the monitor
and the power cord for your computer
into a nearby outlet.
5
Turn on your computer and monitor.
If your monitor displays an image,
installation is complete.
6 Install the monitor driver
• Insert the provided diskette into the
A drive.
• Double click the “install.exe” file.
The Front Panel
1
Monitor control buttons
All adjustments to the image display
are made using these control buttons,
including control of the screen display
area shape and the display image.
2 Adjustment buttons
The decrease ( – ) button lowers the
value of the selected function. The
increase ( + ) button raises the value of
the selected function.
3
Power indicator
This light glows green during normal
operation. It also blinks when a
function button is pressed, or while a
function setting is being automatically
saved.
4
Power button
Turns the monitor on and off.
2
3
4
4
3
1
2
Operation
450BEDel1.book Page 2 Tuesday, January 25, 2000 2:39 PM