Sony VAIO VGN-CR - Manual (Page 118)

118 n N
Upgrading Your VAIO Computer
6 Remove the currently installed memory module as follows:
❑ Pull the latches in the direction of the arrows (1).
The memory module is released.
❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2).
✍
There are two memory module slots in the memory module compartment. If your computer has only one memory module installed at the time of
delivery, it has been inserted in the upper slot. To insert a new memory module into the lower open slot for increasing the amount of memory, remove
the memory module from the upper slot first, and then insert the new memory module into the lower slot and reinsert the removed memory module.
7 Remove the new memory module from its packaging.