Sharp DK-CL5P - Manual (Page 25)

25
2010 November 3 DK-CL5P_A6 02-27.fm
DK-CL5P
Adva
nce
d
Fea
ture
s
■ NAP
The main unit will temporarily enters stand-by mode when pressing
NAP button. After nap time, main unit will power on into last function
used.
To confirm the remaining nap time:
To cancel the NAP operation:
Press the ON/STAND-BY button while “ ” is indicated.
Enhancing your system
The auxiliary cable is not included. Purchase a separate
auxiliary cable as shown below.
1 Playback the desired sound source.
2 Press the NAP button on the remote control repeatedly to
select nap time.
Note:
Selecting “oFF” during NAP setting will activate the last
function.
3 The unit will go to standby mode and NAP indicator ( )
appears on the display.
1 While “ ” is indicated, press the NAP button once to display
“XXX”.
“XXX” is NAP remaining time.
● The remaining NAP time is displayed for about 3 seconds.
● You can change the remaining NAP time while it is displayed
by pressing the NAP button (step 2).
120 90 60 30
oFF 05 10 20
DC IN 8V AUDIO IN VIDEO OUT FM ANTENNA
Portable audio player
Computer
To the line
output jack
Auxiliary cable
(not supplied)