Sharp DK-CL5P - Manual (Page 10)

10
2010 November 11 DK-CL5P_A6 02-27.fm
DK-CL5P
Pr
epa
rat
io
n for Use
DC IN 8V AUDIO IN VIDEO OUT FM ANTENNA
T U O O E D I V
Video cable
(not supplied)
To video input jack
TV
1 Plug the AC/DC adaptor cable into the DC IN jack on
the unit.
2 Plug the AC/DC adaptor into an AC outlet.
DC IN 8V AUDIO IN VIDEO OUT FM ANTENNA
DC IN 8V AUDIO IN O OUT
2
1
AC/DC Adaptor Cable
DC IN Jack
(DC 8V)
AC Outlet
(AC 100 - 240 V, 50/60 Hz)
System connections
Connecting iPod or iPhone to TV
Video files from iPod or iPhone can be viewed by connecting the system to
TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT jack at the
back of the unit and set the TV Out on the iPod unit to “ON” position.
Watching videos on a TV connected to iPod
Notes:
To return to watch video on iPod or iPhone screen, return to the menu. Press
and hold the DISP(TV OUT) on remote control or ALARM 1 (DISPLAY) on
the main unit until “OFF” appear on the display.
During iPod or iPhone video playback, press and hold the DISP(TV OUT) on
the remote control or ALARM 1 (DISPLAY) on the main unit until “OFF”
appear will not toggle video out display between iPod or iPhone and TV.
Please make sure to set iPod unit to either NTSC or PAL to match your TV
signal. Please visit Apple’s home page for further information.
Customer should also refer iPod and iPhone operation manual before
making video out setting.
AC/DC adaptor connection
Notes:
Unplug the AC/DC adaptor from the AC outlet if the unit will
not be used for a prolonged period of time.
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
Connecting the AC/DC adaptor to the unit disconnects the
batteries.
During unit operational with batteries, iPod or iPhone
attached can be used for playback only.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
Make sure to unplug the AC/DC adaptor before making any connections.
1 Press the FUNCTION button on the main unit or remote
control to select the iPod function.
2 Enter the iPod or iPhone menu.
Press and hold DISP(TV OUT) button on the remote control or
ALARM 1 (DISPLAY) button on the main unit until ON appear
on the display.
3 Select the desired video to be played.
4 Press the ENTER button on the remote control to start playback.