Samsung CL21M6W - Manual (Page 41)

C HAPTER F OUR : S PECIAL F EATURES
4.3
S
P E C I A L
F
E AT U R E S
Cable Box Codes
015,016
015,016
005
003
004
015,016
020
054
012,013,023,031,032,033,038,044,075,076,077
011,012,020,021,042,056
045,051,054
012,013,023,031,032,033,038,044,054
070,073
006
045,051
015,016,027,029,034
036,037,040,041,048,049
001
017
024,046
024
011,035,047,069
015,016,027,029,034,036
037,040,041,048,049
026,028,052
015,016
008,035,074
011,020,021
010,041
007
000,011,030,052,071,072
054
035
054
066
019,067
002
019,067
025,029,057,058,063
039,040,049
059,060
015,016,027,029,034,036
037,040,041,048,049
052
022,050,065,069
▼
4
Enter three digits of the cable box code listed below for
your brand of cable box.
Make sure you enter three digits
of the code, even if the first digit is a
“0.” (If more than one code listed,
try the first one.)
▼
5
Press POWER. Your cable box should turn on. If your cable
box turns on, your remote control is now “set up” correctly.
If your cable box does not turn
on, repeat steps 2, 3, and 4, but try
one of the other codes listed for your
particular brand of cable box. (If no
other codes are listed, try each cable
box code, 000 through 035.)
▼
6
Once your remote control is set up, press the CABLE button
any time you want to use the remote to operate your cable
box.
When your remote control is
in the “CABLE” mode, the volume
buttons still control your TV’s vol-
ume. Also, the VCR control buttons
(PLAY, STOP, etc.) will still operate
your VCR.
2
Press the CABLE button on the top right of your remote con-
trol.
▼
3
On your Samsung remote control, press SET.
The remote control has four
“modes”: “TV,” “VCR,” “DVD” and
“CABLE”.
Press the “CABLE” button to switch
the remote control to the “Cable”
mode.
1
Turn off your
cable box.
Setting Up Your Remote Control to Operate Your Cable Box