Sharp R-1751 - Manual (Page 15)

15
MULTIPLE SEQUENCE COOKING
The oven can be programmed for up to four automatic cooking sequences, switching from one power level
setting to another automatically. Sometimes cooking directions tell you to start on one power level and then
change to a different power level. Your oven can do this automatically.
• Suppose you want to cook roast beef for 5 minutes at 70% power and then continue to cook for 30 minutes at
50% power:
M A N U A L O P E R A T I O N
VARIABLE POWER COOKING
There are eleven preset power levels. To change the power level, touch Power Level after entering the cooking
time. Using lower power levels increases the cooking time which is recommended for foods such as cheese,
milk and long slow cooking of meats. Consult cookbook or recipes for specific recommendations.
• Suppose you want to cook for 5 minutes at 30% power:
1 Enter cooking time, 5, 0, 0
by touching numbers.
Touch Power Level.
2 Touch 30%. The top line of
the display will show time
and chosen power level.
Press START pad.
3 The display will begin counting
down the cooking time. During
the cooking, the power level
will appear in the display.
2 Touch 70%. You can omit
this step when you set 100%
power.
1 Enter cooking time, 5, 0, 0
by touching numbers.
Touch Power Level.
6 The display will begin counting
down the total cooking time.
During the cooking, the power
level will appear in the display.
3 Touch Multiple Sequence.
5 Touch 50%. Then press the
START pad.
4 Touch second cooking
time 3, 0, 0, 0. Touch
Power Level.