Sharp R-1751 - Manual (Page 14)

14
TIME COOKING
1 Enter cooking time, 5, 0, 0 by touching
numbers. Note the top line of the display.
Press the START pad.
2 The display will begin counting down the
cooking time. During the cooking, the power
level will appear in the display.
M A N U A L O P E R A T I O N
Your oven can be programmed for 99 minutes and 99 seconds (99.99). Always enter the seconds after the
minutes, even if they are both zeros.
HIGH POWER COOKING
• Suppose you want to cook for five minutes at 100% power:
NOTE :
1. If you make a mistake while setting the clock,
touch STOP/CLEAR pad. The Home Page will
appear. To set clock again, press Set Up pad on
the control panel and Clock. Keep touching the
screen until the desired time of day appears.
2. If you want to change the setting of the time of
day, press Set Up pad and follow the directions.
3. If the electrical power supply to your microwave
oven should be interrupted, the screen will inter-
mittently show Video Demo or Set Clock after the
power is reinstated. If this occurs during cooking,
the program will be erased. Simply touch Set Clock
and follow the directions.
4. If you touch continously the Hour, 10 Min or 1 Min
on the Touch Screen, the time will count up
automatically.
STOP/CLEAR
Touch the STOP/CLEAR pad to:
1. Return the Home Page to the display, if you make
a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel Kitchen Timer/Auto Start.
4. Cancel a program during cooking, touch twice.
B E F O R E O P E R A T I N G
NOTE:
If the door is opened or STOP/CLEAR pad is pressed
once during cooking process, the cooking time in the
display automatically stops. The cooking time starts
to count down again when the door is closed and the
START pad is pressed.