Source Technologies ST9620 User Manual

Page 58

Text mode
Original mode

Source Technologies, LLC ST9620 Secure MICR Printer User’s Guide

flash memory. Here we call it and print it with an
exclamation point (!).

&%1B(3@

PCL command to return to the default font.

&%1B$&f0S

PCL command to push (store) the current cursor
position.

&%1B$*p296x3184Y

PCL command to move the cursor to 296X, 3184Y. At
300 dpi, this is .97 inches across and 10.61 inches
down. We are precisely positioning the MICR line.

&%SMD...$

Print E-13B MICR command. Prints the MICR line and
stores the MICR line information in the second position
in the Audit Report.

&%1B$&f1S

PCL command to pop (return) the cursor to the pushed
position.

&%SQ710:33:45 AM$

Here we send the time of print to the printer. The data
is recorded in the Audit Report but this field is not
printed on the page.

&%STORE$

Signals the end of a check and the end of Audit Report
recording.

&%??!!

Turns Hex Transfer off.

Audit Trail Reports | 8