Samsung Digimax 3100 EN - Manual (Page 77)

77
Warning indicator
There are several warnings that may appear on the LCD display
Warning indicator Causes Remedy
- Turn off the camera power and turn it
on again
- Insert the memory card again
- Format the memory card (p.67)
- Memory card error
- There is insufficient
memory capacity to take
an image
- There are no images stored
on the memory card
- A memory card is not inserted
- The camera can t
recognize the memory card
- File error
- Memory card error
- There is low battery
capacity
- The memory card is
locked
CARD ERROR !
CARD FULL !
NO IMAGE !
NO CARD !
FILE ERROR !
LOW BATTERY !
CARD LOCKED !
- Insert a new memory card
- Delete unnecessary image files to
free up some memory
- Take images
- Insert a memory card that is holding
some images
- Insert a memory card
- Insert the memory card again
- Turn off the camera power and turn it
on again
- Format the memory card
- Contact a camera service center
- Insert fresh batteries
- MS DUO : Slide the write protect switch to
the bottom of the memory card
- SD : Slide the write protect switch to the
top of the memory card
- When taking pictures in
dark places
LOW LIGHT !
- Use a tripod and take pictures in
Flash Photography mode