Socket Mobile GFK0121E - Manual (Page 62)

Index
Index-2 GFK-0121E
for analog, RTD, or Thermocouple
block, 5-10
Different Baud error, 7-2
Different Block Types error, 7-2
Dimensions, 1-5
Display, 1-5
special characters, 1-3
testing, 3-7
Duplicate Block Number error, 7-2
Duplicate I/O References error, 7-2
E
EEPROM failure, 3-7
EEPROM Failure error, 7-2
Error messages, during HHM test, 3-7
F
Failed switch diagnostic, 5-9
Fault clearing
configuring HHM to enable fault clear-
ing, 3-6
from Block/Bus Status screen, 5-3
on analog, RTD, or Thermocouple
block, 5-10
on discrete, relay or High-speed Count-
er block, 5-9
on remote drop, 5-14 , 5-16
Features, 1-1
Feedback Error diagnostic, 5-10
Field Control products, compatibility with
HHM versions, 1-4
Field Processor, configuration overview,
4-7
Forcing I/O
configuring HHM to perform, 3-6
on analog, RTD, or Thermocouple
block, 5-10
on Monitor/Control Reference screen,
5-9
on remote drop, 5-14 , 5-15
viewing present status, 5-4
viewing present status of analog circuit,
5-5
viewing present status of circuit on RTD
or Thermocouple block, 5-5
Function Disabled error, 7-2
G
Genius blocks
compatibility with HHM versions, 1-4
I/O type, 5-4
monitoring with HHM, 5-4
H
Hardware setup, 2-1
High-speed Counter blocks, Monitor
block screen, 5-6
High-speed Counter Block
Inputs, display, 5-6
presets, display, 5-6
Humidity, 1-5
I
I/O forced status, 5-4
I/O scanning, for Field Processor, disable,
4-8
I/O type, 5-4
Input Shorted diagnostic, 5-10
Installation, instructions, 2-6 , 2-7
Installed HHM, configuration sugges-
tions, 2-6
Internal Fault diagnostic, 5-10
Invalid Block Configuration error, 7-2
K
Key=Monitor error, 7-2
Keypad, 1-1 , 1-2
testing operation, 3-7
Keys, 1-3 , 1-5
Keyswitch, 1-1
positions, 1-3
L
Languages, 1-1 , 1-5 , 3-5