Socket Mobile GFK0121E User Manual
Ge fanuc automation, Genius t hand-held monitor user’s guide
Table of contents
Document Outline
- Chapter 1 Introduction
- Chapter 2 Hardware Setup
- Chapter 3 Getting Started
- Turning on the Hand-Held Monitor
- Displaying the Home Menu
- Configuring the Hand-held Monitor
- Changing the HHM Device Number
- Changing the HHM Display Language Enabling/Disabling Automatic Shutoff
- Selecting the Host CPU Enabling/Disabling the Ability to Change Block ID Parameters
- Enabling/Disabling the Ability to Change the Enabling/Disabling the Ability to Force I/O Baud Rate o
- Enabling/Disabling the Ability to Clear Faults Enabling/Disabling the Ability to Configure Devices o
- Testing Operation of the Hand-held Monitor
- Chapter 4 Device Configuration Overview
- Chapter 5 Monitoring the Bus and its Devices
- Displaying Information About Bus Devices
- Switching a Dual Bus
- Monitoring a Genius Block
- Monitoring and Controlling Individual Circuits on a Genius Block
- Basic Monitor/Control Display Format
- Making the Block Active
- Diagnostics
- Forcing an Input or Output Clearing Circuit Faults
- Diagnostics
- Clearing Circuit Faults
- Selecting a Memory Type or Address
- PowerTRAC Data Sequence
- PowerTRAC Status Inputs Screens PowerTRAC Control Outputs Screens
- PowerTRAC Calculated Data Screens
- Forcing PowerTRAC Data
- PowerTRAC Extra Calculated Data (LPIO) Screens
- Diagnostics
- Monitoring/Controlling Remote Drop Data
- Monitoring/Controlling Field Control Data
- Pulse Testing Outputs on Discrete Genius Blocks
- Chapter 6 Reading CPU Memory
- Chapter 7 Error Messages
- Index