Sanyo AVL-209 - Manual (Page 18)

Memorizing the Channels
(continued)
16
Manual Fine Tuning
Press VOL+/- to fine tune till the best possible picture and sound are
obtained.
Adding and Erasing Channels
2
3
Use number buttons to directly select a channel that will be added or erased.
1
4
Press ENTER or VOL+/- to select On or Off.
When the item is set to on, the selected channel will be erased.
When the item is set to off, the selected channel will be added.
The erased channels can not be selected by using the CH+/- buttons unless you use number buttons to
input channel number directly.
1
Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.
Cable
Channel
Auto Searching
Move Select Menu to exit
On Off
Source
Channel Skip
Fine Tune
AFC
Frequency 55.25 MHz
Press CH+/- repeatedly to select Fine Tune item.
2
3
Cable
Channel
Auto Searching
Move Select Menu to exit
On Off
Source
Channel Skip
Fine Tune
AFC
Frequency 55.25 MHz
Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.
Press CH+/- repeatedly to select Channel Skip item.
On Off
On Off
If you fine tune a program manually, the AFC will be turned off automatically.