Sanyo VPC-X1200 - Manual (Page 8)

vii
English
SHOOT, PLAY BACK AND SAVE
Before capturing those important shots, be sure to first take a
test shot to confirm that your camera is set up and ready to go
i Sanyo declines any claim for compensation for recorded contents etc. in case
of photographing or recording failure due to a chance camera or card flaw.
Shooting
1
Press the [m] button.
h The recording mode menu
appears.
2
Press the [l] or [m] button to
select the recording mode.
3
Press the SET button.
h The recording mode is
indicated by an icon in the
upper left area of the monitor.
4
Press the shutter button.
Single-shot mode:
A still image is captured.
High-speed sequential shots
mode/sequential shots mode:
Shooting begins. Release the
shutter button to discontinue
shooting.
Video clip recording mode:
Recording begins. To stop
recording, press the shutter
button again.
Shutter button
[l] / [m]
buttons
6
s: Single-shot mode
: High-speed sequential shots mode
O: Sequential shots mode
X
: Video clip recording mode
PHOTOGRAPH 1 IMAGE
Single-shot
Video clip recording
Sequential shots
High-speed sequential shots