Sony DVP-NC615 - Manual (Page 24)

24
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function
of your AV amplifier (receiver). You are not able to enjoy the surround sound effects of this
player.
Note
After you have completed the connection, be sure to
set “DOLBY DIGITAL” to “DOLBY DIGITAL”
and “DTS” to “ON” in Quick Setup (page 25). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set “MPEG” to “MPEG” (page
66). Otherwise, no sound or a loud noise will come
from the speakers.
D
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
Subwoofer Centre
Coaxial digital cord
(not supplied)
[Speakers]
CD/DVD player
l : Signal flow
[Speakers]
Rear (L)
to optical digital
input
to DIGITAL OUT
(COAXIAL)
to DIGITAL OUT
(OPTICAL)
Optical digital cord (not
supplied)
Remove the jack cap
before connecting.
to coaxial digital
input
or