Maintaining your appliance, Self-cleaning, Before a self-cleaning cycle – Samsung FE-N300** User Manual
Page 56
56_ Maintaining your appliance
maintaining your appliance
SelF-cleaninG
This self-cleaning oven uses high temperatures (well above cooking temperatures) to burn off
leftover grease and residue completely or reduce them to a finely powdered ash that you can wipe
away with a damp cloth.
CAUTION
During the self-cleaning cycle, the outside of the range will become very hot to the
•
touch.
Do not leave small children unattended near the appliance.
Some birds are extremely sensitive to the fumes given off during the selfcleaning cycle
•
of any range. Move birds to another well-ventilated room.
Do not
•
line the oven walls, racks, bottom or any other part of the range with
aluminum foil. Doing so will result in poor heat distribution, produce poor baking
results and cause permanent damage to the oven interior. Aluminum foil can melt and
adhere to the interior surface of the oven.
Do not
•
force the oven door open during self-cleaning. This can damage the
automatic door locking system. Use care when opening the oven door after the self-
cleaning cycle is complete. Stand to the side of the oven when opening the door to
allow hot air or steam to escape. The oven may still be
VERY HOT.
Before a self-cleaning cycle
We recommend venting your kitchen by opening a window
•
or using a ventilation fan or hood during the self-cleaning
cycle.
Remove the wire rack, broil pan, broil pan insert, all
•
cookware, and any aluminum foil from the oven.
Wipe up debris from the oven bottom. (Fig. 1)
•
The silver-colored oven racks can be self-cleaned, but they
•
will darken, lose their luster, and become hard to slide.
Residue on the front frame of the range and outside the
•
gasket on the door will need to be cleaned by hand. Clean
these areas with hot water, soap-filled steel-wool pads or
cleansers such as Soft Scrub. Rinse well with clean water
and dry.
Do not clean the gasket. The fiberglass material of the oven
•
door gasket cannot withstand abrasion. It is essential for
the gasket to remain intact. If you notice it becoming worn
or frayed, replace it. (Fig. 2)
Make sure the oven light bulb cover is in place and the
•
oven light is off.
Fig. 1
Don’t hand
clean the
oven door
gasket.
Fig. 2
You may
hand clean
the door.
FEN300WX DG68-00283A_EN.indd 56
2010-02-24 �� 9:34:52