Sharp XR-10S - Manual (Page 43)

39
Useful
Features
Picture Adjustment (“Picture” menu)
Selectable
items
Standard
Presentation
Movie
Game
*sRGB
Q Example: “Picture” screen menu for
INPUT 1 (RGB) mode
Q Example: “Picture” screen menu for
INPUT 3 mode
Picture
Picture Mode
Contrast 0
0
0
0
K 7 5 0 0
SCR - ADJ PRJ - ADJ Help
Bright
Red
Blue
1
CLR Temp
Bright Boost
Lamp Setting
Standard
Bright
Reset
SEL./ADJ. ENTER END
Description
For standard image
Brightens portions of image for
more enhanced presentations.
Gives natural tint to the
projected image.
Gives sharpness to the
projected image.
For high fidelity reproduction of
images from a computer.
Picture
Picture Mode
Contrast 0
0
0
0
K 7 5 0 0
SCR - ADJ PRJ - ADJ Help
Bright
Color
Tint
0 Sharp
1
CLR Temp
Bright Boost
Progressive 3D Progressive
Standard
Reset
SEL./ADJ. ENTER END
Lamp Setting Bright
Menu operation n Page 37
• You can also press G PICTURE MODE on the remote control to select the picture mode. (See
page 34 .)
• *sRGB is an international standard of color reproduction regulated by the IEC (International
Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are
displayed in a natural tint based on an original image, when “sRGB” is selected.
For additional information about the sRGB function, visit “http://www.srgb.com/”.
You cannot set the items, “Red”, “Blue”, “CLR Temp”, “Bright Boost”, when “sRGB” is selected.
Note
1 1 1 1 1 Selecting the Picture Mode
• When “sRGB” is selected, the projected image may become dark, but this does not indicate a
malfunction.
Info
• “sRGB” is displayed only when RGB signal is input.
• You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are
retained in memory.
XG-MB55X
8500K
8500K
6500K
8500K
–
XR-20X/XR-20S/
XR-10X/XR-10S
7500K
7500K
6500K
7500K
–
Lamp Setting
Bright
Bright
Eco + Quiet
Bright
Bright
The default settings of each item when selecting Picture Mode
Bright Boost
1
2
0
2
–
CLR Temp