Silvercrest KH 2396 - Manual (Page 10)

- 8 -
Providing mains power
Insert the plug into a mains power socket. The display •
r
is illuminated, the time begins to run but the radio is
switched off (Automatic mode).
The settings menu
Setting the time
The radio must be off to set the time.
1. In automatic mode press the button BASS/MODE g
once. The time blinks.
2. Press the buttons UP  /DOWN u/y, to set the time of
day in minute intervals. Press and hold the keys to change
the time in quick succession.
3. Press the button MODE/BASS g again to save the time
of day and move to the date settings.
If, during the settings, you do not press a button within 15
seconds the device saves the setting and returns to the auto-
matic mode.
Setting the date
1. In automatic mode press the button MODE/BASS g twice.
In the display r appears “01.01.10“ and the date indicator
blinks.
2. Press the buttons UP  /DOWN u/y, to set the date
in daily intervals. Press and hold the keys to change the
date in quick succession.
3. Press the button MODE/BASS g again to save the date
and to move to the display brightness setting.
Setting the display brightness
1. In automatic mode press the button MODE/BASS g
three times. In the display r appears “L“ (low) and
shows the lowest of the two brightness levels.
2. Press the button UP h to switch to the brighter illumination
level “H” (high). Press the button DOWN y to switch
back to the lower brightness level.
3. Press the button MODE/BASS g again to save the dis-
play brightness setting and to move to the remind function
settings.
Setting the remind function
You can programme a date, which the device will remind
you of when it arrives.
1. In automatic mode press the button MODE/BASS g four
times. The display r shows, alternatively, a date and the
SDA indicator for the remind date.