Samsung GH68-02702A - Manual (Page 41)

75
TTo on ne ess
74
TTo on ne ess
To Delete a Selected Melody
1. Select the melody you want to delete.
2. Press and hold for a few seconds. All notes
will be erased.
3. Press the Listen soft key. The display asks you if
you are sure you want to erase the melody. Select
the Yes soft key.
Ring Volume
Menu 4-3
Allows you to adjust the ringing volume to one of
five levels. Use the volume keys on the left side of
the phone or the or keys. The greater the
number of bars, the greater the volume level.
Alert Type
Menu 4-4
Allows you to indicate how you are to be informed of
any incoming calls. The following options are
available.
Light Only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ringing tone
selected via menu option 4-1.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three times
and then starts ringing.
Note: Pressing and holding down toggles
between the current alert type and Vibration.
: to enter C, the first note in the musical scale (doh).
: to enter D (re).
: to enter E (mi).
: to enter F (fa).
: to enter G (soh).
: to enter A (la).
: to enter B (ti).
: to raise an octave higher or drop an octave lower.
: to enter a note rest. Press until you find the
desired length of rest.
: to raise one semitone above the tone written.
Example: If you want to enter a F sharp, press F
(fa) then press .
: to delete notes.
: to move a note to the next semitone
higher position or lower position in the musical
scale. For example, the note A moves A#, B, C, C#
in the scale each time you press .
: to adjust a length of a note.
You can listen to your melody by pressing the Listen soft
key. If you are satisfied, press the Yes soft key, and enter
the melody name. For information on how to enter a name,
refer to page 42.
Note: If you want to cancel your composing, press
. The display goes back to the previous menu
level, the screen displays Empty.
After you save the melody, the display asks you if you
want to set the melody as the ring tone. If you select Yes,
your phone plays the melody each time your phone rings. If
you select No, the melody is just saved and the phone
returns to the idle mode.