beautypg.com

Setting up the kitchen radio, Commissioning – Silvercrest KH 2281 User Manual

Page 7

background image

- 5 -

4.

Mark the four points for the drillholes with
a pencil.

5.

Mark the drillhole with a mandril.

6.

Firmly secure the mounting plate

q

with the

supplied screws.

7.

Hold the kitchen radio slanted, with the two
recesses in the retaining lugs on the mounting
plate

q

. Press the kitchen radio upwards until

it audibly engages.

Secure the wire antenna with a piece of adhesive
tape such that it does not hang down.

Setting up the kitchen radio

Do not set the kitchen radio up without the mounting
plate

q

. Otherwise the speakers are covered and

the sound is scarcely audible.
To set up the kitchen radio with the enclosed mounting
plate

q

:

1.

Simultaneously press the two retaining levers

w

on the back of the appliance down. Push the
mounting plate

q

back and remove it.

2.

Push the two retainer lugs on the mounting plate

q

into the recesses on the lower rear side of the
kitchen radio.

3.

Firmly press the front part of the mounting plate

q

down until you hear it engage. You can now

set up the radio.

To disassemble the mounting plate

q

, grip the

mounting plate

q

from below with the thumbs and

press it forwards and up until it disengages. You can
now remove the mounting plate

q

.

Commissioning

Inserting the back-up batteries

The back-up batteries ensure that the programmed
time, date, alarm time and set SDAs (Special Day
Alert) are not erased in the event of a power failure.
For this, you require two 1.5V batteries of type
AAA. They are not supplied with the appliance.

1.

Open the lid of the battery compartment

a

on the underside of the kitchen radio.

2.

Insert the batteries. Make sure the polarities
are correct.

3.

Close the lid of the battery compartment

a

.

The lid must audibly engage.

Note:

The back-up batteries must be checked at least
once per year and, if necessary, exchanged
for new ones.

Providing mains power

Insert the plug into a power socket. In the
display, the time is indicated by "00:00.

00

".

To be able to use the alarm functions of the radio,
first of all programme in the date and time, as
described in the following section.

IB_KH2281_Ar5027_LB6 15.07.2008 9:04 Uhr Seite 5