Sony HVL-F32X - Manual (Page 16)

16-GB
Using the flash (continued)
3
Press the control button on the digital still camera to choose
“Flash mode”.
Each press of the button changes the indication in the following order.
No display (AUTO)
t Forced flash ( ) t Slow synchro ( ) t No
flash ( )
* Be sure that “Hot Shoe” is set to [OFF] in the “SET UP” settings.
4
Slide the POWER switch on this unit to “ON”.
• The flash starts to be charged, and the READY lamp and /CHG
lamp on the digital still camera start to flash (orange).
• When the flash is ready to fire, the READY lamp on this unit lights
(orange).
When the charging is finished, the /CHG lamp on the digital still
camera goes out.
• When the batteries are run down, it takes longer to charge this unit.
5
The flash mode of the digital still camera compatible with the
advanced accessory shoe can be changed in the following
order by the mode button on this unit.
/ /
mode photography
This unit performs a pre-flash, the disital still camera calculates
the ideal light intensity, and make this unit flash.