40hz – Stanley Black & Decker KEYPAD EZ LOCKS User Manual
Page 3
3
C P r O D u C t S
HZ SPECifiCAtiOnS
HZ – MorTisE sPEcificATioNs
MEcHANicAl
Case: 0.095" cold rolled steel, 5
7
/
8
" H x
7
/
8
" D x 4
1
/
16
" W. Steel is zinc dichromate plated
for corrosion protection.
Faceplate: Brass or bronze material, 8" H x 1
1
/
4
" W x
1
/
16
" T. Lock face automatically
adjusts to proper bevel during installation.
Strike: Brass, bronze, or stainless steel base material, 4
7
/
8
" H x 1
1
/
4
" W x
3
/
32
" T. Fits
standard door frame cut out as specified in ANSI A115.1. Universal (non-handed) strike
supplied standard with lock.
Backset: 2
3
/
4
"
Certification: UL listed for GYQS electrically controlled single point locks or latches for
use on 3 hour A label doors. The listing applies for both U.S. and Canadian applications.
Door Thickness: Standard lock configuration designed for doors 1
3
/
4
" thick. Thick door
configuration available for doors up to 3" thick (specify thickness when ordering).
Latchbolt: Solid stainless steel,
3
/
4
" throw. Latch is oil-impregnated for anti-friction
operation. Reversible without opening case.
Deadbolt: Stainless steel, 1" throw.
Auxiliary bolt: Stainless steel, non-handed.
Lever handle: Brass, bronze, or stainless steel base material. Lever styles 3, 14, and 15
return to a minimum of
1
/
2
" of door surface. Lever 12, 16 and 17 do not return.
Escutcheon: 10
3
/
8
" H x 3
1
/
4
" W x 1" D (1" at the top, sloping down to
3
/
4
" at the bottom)
Finishes: 605 - bright brass, clear coated; 606-satin brass, clear coated; 611-bright bronze,
clear coated; 612-satin bronze, clear coated; 613*-oxidized satin bronze, oil rubbed; 619-satin
nickel plated; 625-bright chromium plated (brass base material); 626-satin chromium plated
(brass base material); 690*-dark bronze coated (brass base material)
* 613 finish is designed to wear over time, providing an “antique” appearance.
690 finish will continue as a dark brown appearance over time.
ElEcTroNic
Primary power: Alkaline battery pack.
Memory backup: Maintains programming 100 years.
User feedback indicators: Visual and audible.
Operating & Storage temperature: -30°C to +60°C (-22°F to +140°F).
Relative humidity: 10% to 90% non-condensing.
Shock: 2000 Gs RMS (maximum door-slam shock).
Compliance to FCC, Canadian, EMC requirements; for interference FCC Class A digital ap pa ra tus.
KEYPAd
Bezel size: 2
5
⁄
8
" x 3
1
⁄
4
" .
Material: Bezel–High impact ABS,
Keypad–Encapsulated elastomer.
ESD Protection: 15KV
Button operating life: 3-5 million cycles.
Button operating force: 3.88 ounces.
Operating & Storage temperature: -35°C to +65°C
(-31°F to +149°F).
Sealing: Weatherproof lens and gasket provides protection for out door use. (Usable in all environmental/exterior applications.)
40HZ