Stanton C.502 - Manual (Page 10)

6. Pausing
Press the PLAY/PAUSE button to switch between play and pause.
The play indicator flashes when the pause mode is set.
Figure 6 show the relationship between the play and pause.
7. Cueing
"Cueing" is the action of preparing for playback.
Press CUE button, the player will enter cue mode, the playback returns to cue point and enter pause condition,
the cue indicator lights up and the play indicator flashes. When PLAY/PAUSE button is pressed, play starts
from the cue point.
When the track search operation is completed after pressing the SKIP buttons, the player automatically finds
the position at which the sound starts and cues there(Auto Cue).
If the CUE button is pressed after the search operation or the scanning operation, the playback returns to cue
point and enters pause condition.
Figure 7-1 shows the relationship between the play and back cue operations.
The player has completed the cue or pause operation
and is waiting for the play start command.
When the PLAY/PAUSE button is pressed and enter
play mode is entered.
Playing.
The pause mode is set when the PLAY/PAUSE button
is pressed again.
The player has completed the cue or pause operation
and is waiting for the play start command.
When the PLAY/PAUSE button is pressed, playback
starts and the cue point is stored in the memory.
Playing.
The pause mode is set when the PLAY/PAUSE button
Cue point setting:
When play starts from pause by pressing the IN button or Scanning or Frame Search; also skip to a new track
by using skip button, the begin play point will be set to the new cue point.
When a new cue point is set, the cue indicator lights by flash for about 1 second.
NOTE: During cue mode, if the CUE button is pressed and hold, playback will start from the cue point, when the
button is released, the player will return to the cue mode automatically, it allows you to check the cue point.
8. Jog Wheel - The jog wheel serves two functions depending on the current operating mode:
The jog wheel will act as a slow frame search control when the unit is in pause or cue mode allowing you to set
a specific cue point or find a particular starting point.
The wheel also works as a momentary pitch bend during playback . Turning the wheel clockwise will
increase the pitch percentage up to +16%, and turning the wheel in the counterclockwise direction will
decrease the pitch percentage up to -16%. The pitch bend will be determined by how fast you turn the wheel.
1
2
3
5
6
7
4
is
Pausing.
When the PLAY/PAUSE button is pressed again;
Playing.
Press the CUE button.
The pickup returns to the cue point.(Back Cue) Pressed again.
Pausing.
Playback resumes when the PLAY/PAUSE button
is pressed again.
Playing.
1
2
3
4
5
6
7
8
9
9
2 4 6
1 5
3 7
Figure 6
6 2 4
1 5
3
2
1
8
9
3
9
7
8
Figure 7-1
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord.
If it is damaged or deformed, it may cause electric
shock or malfunction when used. When removing
from wall outlet,be sure to remove by holding the
plug attachment and not by pulling the cord.
2. In order to prevent electric shock, do not open the
top cover. If a problem occurs, contact your dealer.
3. Do not place metal objects or spill liquid inside the
CD player. Electric shock or malfunction may result.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS
THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
IMPORTANT TO SAFETY NOTE:
This CD player uses the semiconductor laser. To allow
you to enjoy music at a stable operation, it is recommended
to use this in a room of 5ºC 41ºF - 35ºC 95ºF.
CAUTION:
Please, record and retain the Model name and serial
number of your set shown on the rating label.
Model No. ___________ Serial No. ___________
CAUTION: TO REDUCE THE
RISK OF ELECTRICf SHOCK,
DO NOT REMOVE THE COVER
(OR BACK) . THERE ARE NO
SERVICEABLE PARTS INSIDE.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
insulated "dangerous voltage" within the
product's enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
FOR U.S.A. & CANADA MODEL ONLY
CAUTION
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
REFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE EXCEPT
PROPERLY QUALIFIED SERVICE PERSONNEL.
DOUBLE INSULATED - WHEN SERVICING, USE
ONLY IDENTICAL REPLACEMENT PARTS.
NOTE:
This unit may cause interference to radio and television
reception.
Line Voltage Selection (for multiple voltage
model only)
The desired voltage may be set with the
VOLTAGE SELECTOR switch on the rear
panel, using a screwdriver.
Do not twist the VOLTAGE SELECTOR
switch with excessive force as this may
cause damage
If the VOLTAGE SELECTOR switch does not move
smoothly, please contact a qualified serviceman.
1
RATING LABEL
CLASS 1 LABEL
115V
230V