Sharp AL-1661CS - Manual (Page 83)

79
SPECIAL FUNCTIONS
5
6 Press the [ ] key ( ) or [ ] key ( )
to select the day of the week and
press the [ENTER] key.
7 Press the [ ] key ( ) or [ ] key ( )
to select the transmission mode and
press the [ENTER] key.
8 Enter the fax number of the other
machine using one of the following
methods:
• Press a Rapid key.
• Enter a Speed Dial number with the numeric
keys.
• Enter the fax number with the numeric keys.
9 Press the [ENTER] key.
CANCELING A TIMER TRANSMISSION JOB
After a timer transmission job is set up, the job goes on standby until the specified time of transmission. If necessary,
the MEMORY STATUS function can be used to cancel a timer transmission job that is on standby ("CANCELING
(DELETING) A STORED FAX JOB" on page 61).