Sharp AL-1661CS - Manual (Page 39)

35
INITIAL SETTINGS
2
SETTING THE INDEX FUNCTION
You can print an index mark along the edge of the pages in each job. This makes it easy to separate different jobs
on the output tray.
Use the following procedure to set the index function:
1 Press the [MENU] key.
2 Press the [ ] key ( ) or [ ] key ( )
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
3 Press the [ ] key ( ) or [ ] key ( )
until "22:INDEX PRINT" appears, and
then press the [ENTER] key.
4 Press the [ ] key ( ) or [ ] key ( )
to select "1:ON" or "2:OFF".
5 Press the [ENTER] key.
6 Press the [CLEAR ALL] key ( ).
Press the [CLEAR ALL]
key (
) to exit.
Separate faxes
with index marks.
"4:USER PROGRAM"
Selection
"22:INDEX PRINT"
Selection