Power connector power connector (molex) pinouts – Sierra Wireless MP 595 User Manual
Page 29
Hardware and Software Installation
Note: Connector part numbers:
39-01-2040 or 39-01-2045. Pins
part number: 39-00-0039.
Note: Electrical installations are potentially dangerous and should be
performed by personnel thoroughly trained in safe electrical wiring
procedures for vehicles.
Power connector
The power harness connects to the MP modem with a Molex
connector.
Power connector (Molex) pinouts
The pinouts for the Molex connector on the power harness are:
White wire
(Ignition sense)
Red wire
(Battery)
Unused
Black wire
(Ground)
Figure 2-6: Pinouts for the power harness.
The battery (red) and ignition sense (white) wires in the power
harness include 5 A fuses. The black ground wire is not fused.
(See
power harnesses are available from Sierra Wireless.
Rev 1.3 Aug.07
29