Installation instructions, Tools needed for installation, See exhaust requirements – Samsung DC68-02312A-04 User Manual
Page 7

SAMSUNG Dryer Owner’s Instructions A-1
Tools needed for installation
Proper installation is the owner’s responsibility.
HOWEVER, SERVICE CALLS PERFORMED AS A RESULT OF POOR SET-UP, ADJUSTMENT, AND
CONNECTION ARE THE RESPONSIBILITY OF THE INSTALLER.
Make sure you have everything necessary for proper installation.
1. GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements.
2. POWER CORD for electric dryers (except Canada).
3. GAS LINES (if a gas dryer) must meet national and local codes.
4. EXHAUST SYSTEM – must be rigid metal or flexible stiff-walled metal exhaust ducting.
See Exhaust Requirements.
Installation Instructions
Door
Control panel
Adjustable leg
Pliers
Cutting knife
Pipe wrench (gas only)
Nut drivers
Level
Screwdriver (standard)
Duct tape
Crescent spanner
- DV317AES-XAA DV3C6BGW-XAA DV316LEW-XAA DV3C6BEW-XAA DV317AEW-XAA DV316BGC-XAA DV316BEC-XAA DV317AGS-XAA DV317AGW-XAA DV316LEW-XAC DV206AES-XAA DV206AGS-XAA DV316BEW-XAA DV316BGW-XAA DV2C6BEW-XAA DV317AGG-XAA DV316LGW-XAA DV316LES-XAA DV316LES-XAC DV306LGW-XAA DV316LGS-XAA DV2C6BGW-XAA DV306LEW-XAA DV317AEG-XAA DV316BEW-XAC